Student Extras
Teacher's Guides
The Physics Classroom » Physics Tutorial » Electric Circuits » Electric Potential Difference
Electric Circuits - Lesson 1 - Electric Potential Difference
- Electric Field and the Movement of Charge
- Electric Potential
- Electric Potential Difference
In the previous section of Lesson 1, the concept of electric potential was introduced. Electric potential is a location-dependent quantity that expresses the amount of potential energy per unit of charge at a specified location. When a Coulomb of charge (or any given amount of charge) possesses a relatively large quantity of potential energy at a given location, then that location is said to be a location of high electric potential. And similarly, if a Coulomb of charge (or any given amount of charge) possesses a relatively small quantity of potential energy at a given location, then that location is said to be a location of low electric potential. As we begin to apply our concepts of potential energy and electric potential to circuits, we will begin to refer to the difference in electric potential between two points. This part of Lesson 1 will be devoted to an understanding of electric potential difference and its application to the movement of charge in electric circuits. The standard metric unit on electric potential difference is the volt, abbreviated V and named in honor of Alessandro Volta. One Volt is equivalent to one Joule per Coulomb. If the electric potential difference between two locations is 1 volt, then one Coulomb of charge will gain 1 joule of potential energy when moved between those two locations. If the electric Electric circuits, as we shall see, are all about the movement of charge between varying locations and the corresponding loss and gain of energy that accompanies this movement. In the previous part of Lesson 1, the concept of electric potential was applied to a simple battery-powered electric circuit. In that With a clear understanding of electric potential difference, the role of an electrochemical cell or collection of cells (i.e., a battery) in a simple circuit can be correctly understood. The cells simply supply the energy to do work upon the charge to move it from the negative terminal to the positive terminal. By providing energy to the charge, the cell is capable of maintaining an electric potential difference across the two ends of the external circuit. Once the charge has reached the high potential terminal, it will naturally flow through the wires to the low potential terminal. The movement of charge through an electric circuit is analogous to the movement of water at a water park or the movement of roller coaster cars at an amusem*nt park. In each analogy, work must be done on the water or the roller coaster cars to move it from a location of low It is often convenient to speak of an electric circuit such as the simple circuit discussed here as having two parts - an internal circuit and an external circuit. The internal circuit is the part of the circuit where energy is being supplied to the charge. For the simple battery-powered circuit that we have been referring to, the portion of the circuit containing the electrochemical cells is the internal circuit. The external circuit is the part of the circuit where charge is moving outside the cells through the wires on its path from the high potential terminal to the low potential terminal. The movement of charge through the internal circuit requires energy since it is an uphill movement in a direction that is against the electric field. The movement of charge through the external circuit is natural since it is a movement in the direction of the electric field. When at the positive terminal of an electrochemical cell, a positive test charge is at a high electric pressure in the same manner that water at a water park is at a high water pressure after being pumped to the top of a water slide. Being under high electric pressure, a positive test charge spontaneously and naturally moves through the external circuit to the low pressure, low potential location. As a positive test charge moves through the external circuit, it encounters a variety of types of circuit elements. Each circuit element serves as an energy-transforming device. Light bulbs, motors, and heating elements (such as in toasters and hair dryers) are examples of energy-transforming devices. In each of these devices, the electrical potential energy of the charge is transformed into other useful (and non-useful) forms. For instance, in a light bulb, the electric potential energy of the charge is transformed into light energy (a useful form) and thermal energy (a non-useful form). The moving charge is doing work upon the light bulb to produce two different forms of energy. By doing so, the moving charge is losing its electric potential energy. Upon leaving the circuit element, the charge is less energized. The location just prior to entering the light bulb (or any circuit element) is a high electric potential location; and the location just after leaving the light bulb (or any circuit element) is a low electric potential location. Referring to the diagram above, locations A and B are high potential locations and locations C and D are low potential locations. The loss in electric potential while passing through a circuit element is often referred to as a voltage drop. By the time that the positive test charge has returned to the negative terminal, it is at 0 volts and is ready to be re-energized and pumped back up to the high voltage, positive terminal. An electric potential diagram is a convenient tool for representing the electric potential differences between various locations in an electric circuit. Two simple circuits and their corresponding electric potential diagrams are shown below. In Circuit A, there is a 1.5-volt D-cell and a single light bulb. In Circuit B, there is a 6-volt battery (four 1.5-volt D-cells) and two light bulbs. In each case, the negative terminal of the battery is the 0 volt location. The positive terminal of the battery has an electric potential that is equal to the voltage rating of the battery. The battery energizes the charge to pump it from the low voltage terminal to the high voltage terminal. By so doing the battery establishes an electric potential difference across the two ends of the external circuit. Being under electric pressure, the charge will now move through the external circuit. As its electric potential energy is transformed into light energy and heat energy at the light bulb locations, the charge decreases its electric potential. The total voltage drop across the external circuit equals the battery voltage as the charge moves from the positive terminal back to 0 volts at the negative terminal. In the case of Circuit B, there are two voltage drops in the external circuit, one for each light bulb. While the amount of voltage drop in an individual bulb depends upon various factors (to be discussed later), the cumulative amount of drop must equal the 6 volts gained when moving through the battery. The electrical potential difference across the two inserts of a household electrical outlet varies with the country. Use the Household Voltages widget below to find out the household voltage values for various countries (e.g., United States, Canada, Japan, China, South Africa, etc.). 1. Moving an electron within an electric field would change the ____ the electron. See Answer Answer: C When a force is required to move an electron in the direction of an electric field, its electrical potential energy increases. On the other hand, an electron moving opposite the direction of the electric field will decrease its electrical potential energy. This is because the electric field direction is in the direction which a positive charge spontaneously moves. An electron is negatively charged. 2. If an electrical circuit were analogous to a water circuit at a water park, then the battery voltage would be comparable to _____. b. the speed at which water flows through the circuit c. the distance that water flows through the circuit d. the water pressure between the top and bottom of the circuit e. the hindrance caused by obstacles in the path of the moving water See Answer Answer: D The battery establishes an electric potential difference across the two ends of the external circuit and thus causes the charge to flow. The battery voltage is the numerical value of this electric potential difference. In an analogous manner, it is the difference in water pressure between the top of the water slide and the bottom of the water slide that the water pump creates. This difference in water pressure causes water to flow down the slide. Because of the similarity between electric potential difference in an electric circuit and water pressure in a water park, the quantity electric potential difference is sometimes referred to as electric pressure. 3. If the electrical circuit in your Walkman were analogous to a water circuit at a water park, then the battery would be comparable to _____. b. the obstacles that stand in the path of the moving water c. the pump that moves water from the ground to the elevated positions d. the pipes through which water flows e. the distance that water flows through the circuit See Answer Answer: C The electrochemical cells in an electric circuit supply the energy to pump the charge from the low energy terminal to the high energy terminal, thus providing a means by which the charge can flow. In an analogous manner, a water pump in a water park supplies the energy to pump the water from the low energy position to the high energy position. Because of the similarity between the battery in an electric circuit and a water pump in a water park, the battery is sometimes referred to as a charge pump. 4. Which of the following is true about the electrical circuit in your flashlight? b. The battery supplies the charge (electrons) that moves through the wires. c. The battery supplies the charge (protons) that moves through the wires. d. The charge becomes used up as it passes through the light bulb. e. The battery supplies energy that raises charge from low to high voltage. f. ... nonsense! None of these are true.
Consider the task of moving a positive test charge within a uniform electric field from location A to location B as shown in the diagram at the right. In moving the charge against the electric field from location A to location B, work will have to be done on the charge by an external force. The work done on the charge changes its potential energy to a higher value; and the amount of work that is done is equal to the change in the potential energy. As a result of this change in potential energy, there is also a difference in electric potential between locations A and B. This difference in electric potential is represented by the symbol ΔV and is formally referred to as the electric potential difference. By definition, the electric potential difference is the difference in electric potential (V) between the final and the initial location when work is done upon a charge to change its potential energy. In equation form, the electric potential difference is
potential difference between two locations is 3 volts, then one coulomb of charge will gain 3 joules of potential energy when moved between those two locations. And finally, if the electric potential difference between two locations is 12 volts, then one coulomb of charge will gain 12 joules of potential energy when moved between those two locations. Because electric potential difference is expressed in units of volts, it is sometimes referred to as the voltage.Electric Potential Difference and Simple Circuits
discussion, it was explained that work must be done on a positive test charge to move it through the cells from the negative terminal to the positive terminal. This work would increase the potential energy of the charge and thus increase its electric potential. As the positive test charge moves through the external circuit from the positive terminal to the negative terminal, it decreases its electric potential energy and thus is at low potential by the time it returns to the negative terminal. If a 12 volt battery is used in the circuit, then every coulomb of charge is gaining 12 joules of potential energy as it moves through the battery. And similarly, every coulomb of charge loses 12 joules of electric potential energy as it passes through the external circuit. The loss of this electric potential energy in the external circuit results in a gain in light energy, thermal energy and other forms of non-electrical energy.
gravitational potential to a location of high gravitational potential. Once the water or the roller coaster cars reach high gravitational potential, they naturally move downward back to the low potential location. For a water ride or a roller coaster ride, the task of lifting the water or coaster cars to high potential requires energy. The energy is supplied by a motor-driven water pump or a motor-driven chain. In a battery-powered electric circuit, the cells serve the role of the charge pump to supply energy to the charge to lift it from the low potential position through the cell to the high potential position.
Electric Potential Diagrams
Check Your Understandinga. mass of
b. amount of charge onc. potential energy of
a. the rate at which water flows through the circuit
a. the people that slide from the elevated positions to the ground
a. Charge moves around the circuit very fast - nearly as fast as the speed of light.
See Answer Answer: E As emphasized on this page, the battery supplies the energy to move the charge through the battery, thus establishing and maintaining an electric potential difference. The battery does not supply electrons nor protons to the circuit; those are already present in the atoms of the conducting material. In fact, there would be no need to even supply charge at all since charge does not get used up in an electric circuit; only energy is used up in an electric circuit.
5. If a battery provides a high voltage, it can ____.
a. do a lot of work over the course of its lifetimeb. do a lot of work on each charge it encounters
c. push a lot of charge through a circuit
d. last a long time
See Answer Answer: B The electric potential difference or voltage of a battery is the potential energy difference across its terminals for every Coulomb of charge. A high voltage battery maximizes this ratio of energy/charge by doing a lot of work on each charge it encounters.
The diagram below at the right shows a light bulb connected by wires to the + and - terminals of a car battery. Use the diagram in answering the next four questions.
6. Compared to point D, point A is _____ electric potential.
a. 12 V higher inb. 12 V lower in
c. exactly the same
d. ... impossible to tell
See Answer Answer: A The positive terminal of a battery is higher in electric potential than the negative terminal by an amount which is equal to the battery voltage.
7. The electric potential energy of a charge is zero at point _____.
See Answer Answer: D The negative terminal of the battery is the low voltage location on a circuit. It is considered to be at 0 Volts.
8. Energy is required to force a positive test charge to move ___.
a. through the wire from point A to point Bb. through the light bulb from point B to point C
c. through the wire from point C to point D
d. through the battery from point D to point A
See Answer Answer: D Energy is required to cause a positive test charge to move against the electric field between the negative and the positive terminal.
9. The energy required to move +2 C of charge between points D and A is ____ J.
a. 0.167b. 2.0
See Answer Answer: E A 12 volt battery would supply 12 Joules of electric potential energy per every 1 Coulomb of charge which moves between its negative and positive terminals. The ratio of the change in potential energy to charge is 12:1. Thus, 24 Joules would be the difference in potential energy for 2 Coulombs of charge.
10. The following circuit consists of a D-cell and a light bulb. Use >, <, and = symbols to compare the electric potential at A to B and at C to D. Indicate whether the devices add energy to or remove energy from the charge.
See Answer The electrochemical cell adds energy to the charge to move it from the low potential, negative terminal to the high potential, positive terminal. The light bulb removes energy from the charge. Thus, the charge is at lower energy and a lower electric potential when at locations C and A. Since there is no energy-consuming circuit element between locations B and D, these two locations have roughly the same electric potential. The same can be said of locations C and A.
11. Use your understanding of the mathematical relationship between work, potential energy, charge and electric potential difference to complete the following statements:
a. A 9-volt battery will increase the potential energy of 1 coulomb of charge by ____ joules.b. A 9-volt battery will increase the potential energy of 2 coulombs of charge by ____ joules.
c. A 9-volt battery will increase the potential energy of 0.5 coulombs of charge by ____ joules.
d. A ___-volt battery will increase the potential energy of 3 coulombs of charge by 18 joules.
e. A ___-volt battery will increase the potential energy of 2 coulombs of charge by 3 joules.
f. A 1.5-volt battery will increase the potential energy of ____ coulombs of charge by 0.75 joules.
g. A 12-volt battery will increase the potential energy of ____ coulombs of charge by 6 joules.
See Answer This question targets your mathematical understanding of the relationship between the electrical potential difference, the voltage and the amount of charge. The relationship is expressed by the following equation: b. A 9-Volt battery will increase the potential energy of 2 Coulombs of charge by 18 Joules. c. A 9-Volt battery will increase the potential energy of 0.5 Coulombs of charge by 4.5 Joules. d. A 6 -Volt battery will increase the potential energy of 3 Coulombs of charge by 18 Joules. e. A 1.5 -Volt battery will increase the potential energy of 2 Coulombs of charge by 3 Joules. f. A 1.5 Volt battery will increase the potential energy of 0.5 Coulombs of charge by 0.75 Joules. g. A 12 Volt battery will increase the potential energy of 0.5 Coulombs of charge by 6 Joules.
Jump To Next Lesson:
- What is an Electric Circuit?
